Renaming A Draw File - DeLorme Topo USA 8.0 User Manual

Topo USA User Guide
Point Object (MapNote, Text Label,
Symbol, Image)
Line Object (Line, Arc, Spline)
You can right-click a draw object on the map and change it to a road, track, trail,
waypoint, or draw layer, depending on the type of draw object you selected. When
the draw file type is changed, the original draw file is maintained and a copy is made
and switched to the new draw file type, leaving you with two files: the original draw
file and the copied draw file, which has a new draw file type.
To Change a Draw Object
Use the following steps to change a draw object type.
1. Use the Draw tab to place a draw object on the map.
2. To change a routable trail, track, or line to a road layer, right-click the object
on the map, point to Manage Draw, and then click Copy to Active Road
Layer.
OR
To change a routable road or routable trail to a track layer, right-click the
object on the map, point to Manage Draw, and then click Copy to Active
Track Layer.
OR
To change a routable road, track, or line to a trail layer, right-click the object,
point to Manage Draw, and then click Copy to Active Trail Layer.
OR
To change a routable road, routable trail, waypoint, or track to a draw layer,
right-click the object on the map, point to Manage Draw, point to Copy to
Draw Object, and then click the object to copy to.
OR
To create a copy of an existing area object, point object, or line object, right-
click the object on the map, point to Manage Draw, point to Copy to Draw
Object, and then click the object to copy to.
OR
To change a track to a GPS log, right-click the track on the map, point to
Manage Draw, and click Copy Track to GPS Log.
OR
To change a symbol to a waypoint, right-click the symbol on the map, point
to Manage Draw, and click Copy Symbol to Waypoint.
Tip You can also change a draw file type using the File section of the Draw tab. For
more information, see Copying a Draw File.

Renaming a Draw File

Once you create a draw file, you can rename it in the draw file list or on the map.
To Rename a Draw File
Use the following steps to rename a draw file.
1. Click the Draw tab.
116