Table of Contents
Advertisement
6. Click OK.
All map printouts print with a transparent background.
To Print Maps With a Yellow/Black Background
Use the following steps to turn on the yellow/black background when printing a map.
1. Center the map on the area you want to print.
2. Click the Print tab and then click the Map subtab.
3. Select the Print Layout options. For more information, see Printing a Map.
4. Click Setup.
The Print Setup dialog box opens.
5. At the bottom of the dialog box, clear the Print Maps with a Transparent
Background check box.
6. Click OK.
All map printouts print with a yellow background (or black if you are using
High Contrast Colors).
Manually Assembling a Multi-page Map
After you have printed the sheets for your multi-page map, you are ready to
assemble the map.
Before you begin, be sure you have a clear work surface large enough to
accommodate the final map size.
You will need the following tools to assemble your map:
•
Pencil
•
Razor knife
•
Straight-edge ruler (longer than the edge of the longest sheet)
•
Permanent tape (invisible or "magic" type)
•
Removable tape
To Manually Assemble a Multi-page Map
Use the following steps to manually assemble a multi-page map.
1. For each sheet that needs to be trimmed, mark the edges of the sheet to
indicate the areas to trim.
2. Use the straight edge ruler and razor knife to trim each sheet to the thin
black line bordering the map.
Note For adjacent sheets, trim only one page. This makes piecing the sheets
together easier.
The following diagrams of a 2 x 2 and 3 x 3 multi-page map provide
additional information on where to trim the sheets. The arrows indicate the
edges to be trimmed.
2 x 2 multi-page Map
Printing
95
Advertisement
Table of Contents
