Moving Draw Objects - DeLorme Topo USA 8.0 User Manual

To copy multiple draw objects, click the Select tool
over the draw objects you want to copy.
4. To copy, press the CTRL+C keys on your keyboard.
5. To paste, press CTRL+V on your keyboard. The newly copied object is placed
directly on top of the original (copied) object.
6. To move the copied object, use the table below.
If the draw object is
a...
Routable Road, Routable
Trail, Track, Line, Arc,
Spline, Polygon,
Rectangle, Circle, or
MapNote
Symbol or Text
Tips
• To undo the move of the pasted draw object, click the Undo button
undo the last action. If you decide not to undo the last action, click the Redo
button .
• If you undo the first move of the pasted object, the object is placed back on
top of the original (copied) object.
• To copy and move a single object, select the draw object you want to copy,
press the CTRL key on your keyboard, and drag the draw object to the new
location.
• If the item you copied does not successfully paste, it may be because you
clicked out of the map display. To focus the cursor back on the map, click
inside the map display. Then, try pasting again.

Moving Draw Objects

You can move any draw object you place on the map using the Draw tab from one
location to another.
To Move Draw Objects
Use the following steps to move draw objects.
1. Open the project that contains the object you want to move.
2. Click the Draw tab.
3. Click the Select tool
displays around the active object.
You can move draw objects in different ways:
If the object is a(n)...
Routable Road, Routable
Trail, Track, Line, Arc, Spline,
Then...
Press and hold the SHIFT
key on your keyboard
and drag the object to
the new location.
Drag the object to the
new location.
and click the draw object you want to move. A box
Then...
Press and hold the SHIFT key on your
keyboard and drag the object to the new
Using the Draw Tools
and then drag a box
to
119