Renaming A Draw Object - DeLorme Topo USA 8.0 User Manual

Topo USA User Guide
Polygon, Rectangle, or Circle
Symbol or Text
MapNote
Tip To undo a draw object move, click the Undo button
action. If you decide not to undo the last action, click the Redo button
Notes You can also move draw objects or their points by typing a new
coordinate or distance and bearing/angle number within the corresponding text
boxes.
Type new coordinates and click Apply to move circles, symbols, text,
and MapNotes. The whole object moves to the entered location. If you
change the distance and bearing numbers, the object moves in
relationship to the object's last location.
Type new coordinates and click Apply to move individual end points
(small red circles) in line segments in routable roads, trails, lines,
splines, polygons, rectangles, and arcs. If you change the distance and
bearing numbers of the individual points (not recommended for
rectangles), the end point's distance and bearing/angle change in
relationship to the start point of the segment.

Renaming a Draw Object

Once you create a draw object, you can rename it in the draw file list or on the map.
To Rename a Draw Object in the File List
Use the following steps to rename a draw object in the file list.
1. Click the Draw tab.
120
location.
OR
Press the arrow keys on your keyboard
to move the object up, down, right, or
left.
Press the arrow keys on your keyboard
to move the object up, down, right, or
left.
OR
Drag it to the new location.
To move the entire MapNote, press and
hold the SHIFT key on your keyboard
and drag the object to the new location,
or position your cursor between the
MapNote text and the anchor and drag
the entire MapNote to the desired
location.
OR
To move the MapNote's anchor, drag the
MapNote's anchor to the new location.
OR
To move the MapNote's text, drag the
MapNote's text to the desired location.
to undo the last
.