Image Controls - LaCie 500 Series User Manual

LaCie 500 Series LCD Monitor
User Manual

4.3. Image Controls

Symbol Menu title
LEFT/RIGHT
DOWN/UP
H.SIZE (V.SIZE)
(Analog Input Only)
FINE
(Analog Input Only)
AUTO FINE
(Analog Input Only)
EXPANSION
Explanation
Controls Horizontal Image Position within the display area of the LCD.
Controls Vertical Image Position within the display area of the LCD.
Adjusts the horizontal size. If the AUTO ADJUST function does not provide a satisfactory
picture setting, further tuning can be performed using the H.SIZE (OR V.SIZE) function
(dot clock). A Moiré test pattern may prove helpful in finding your ideal setting. Please be
advised that this setting may alter the width of the picture. Use the LEFT/RIGHT Menu to
center the image on the screen and note that the image should be homogeneous.
H.SIZE
value is incorrect
Improves focus, clarity, and image stability. Use the FINE function to complement or en-
hance any adjustments the have been made with AUTO ADJUST and H.SIZE (OR V.SIZE).
A Moiré test pattern may prove helpful in finding your ideal setting. The image should be
homogeneous.
FINE
FINE
value is correct
value is incorrect
Automatically adjusts the FINE setting to compensate for changes in the signal condition.
This function makes adjustments periodically, approximately every 33 minutes, or when a
change in signal timing is detected.
Sets the zoom.
FULL: The image is expanded to 1920 x 1200 regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM: Refer to 4.9. Advanced Menu Functions
OSD Control Menu Functions
H.SIZE
value is improved
for detailed instructions.
page 19
H.SIZE
value is correct