Using The Picture Mode Function - LaCie 500 Series User Manual

LaCie 500 Series LCD Monitor
User Manual

4.10. Using the Picture Mode Function

Choose the Picture mode that is best suited to display the
selected content. You may adjust the BRIGHTNESS, AUTO
LUMINANCE and UNIFORMITY while in this mode. There are
four Picture modes: STANDARD, sRGB, Adobe RGB, and PRO-
GRAMMABLE.
•
To access the Picture mode, press the RESET button while
the OSD menu is not active.
•
To select a mode, press the LEFT and RIGHT button.
•
To exit the Picture mode, press the EXIT button.
•
Scroll the menu using the UP and DOWN buttons and
make all adjustments with the LEFT and RIGHT buttons.
Picture Mode
STANDARD
sRGB
Adobe RGB
PROGRAMMABLE
Purpose Color Control
Save the color set- Settings made via the OSD
tings according to COLOR CONTROL.
your preference.
Save sRGB set- Fixed at 6500K for sRGB
tings. (OSD COLOR CONTROL
adjustment not available).
Save Adobe RGB Fixed at 6500K for
settings. Adobe RGB (OSD COLOR
CONTROL adjustment not
available).
Save the LaCie Fixed at PROGRAMMABLE
blue eye pro set- (OSD COLOR CONTROL
tings. (BRIGHT- adjustment not available).
NESS is disabled.)
TECHNICAL NOTE: When PROGRAMMABLE is selected, you
cannot adjust the BRIGHTNESS or use AUTO LUMINANCE.
TECHNICAL NOTE: To make adjustments using Adobe RGB
mode, choose sRGB mode then press SELECT.
Gamma Selection (Advanced Menu)
Settings made via the OSD GAMMA Selection.
Fixed to GAMMA for sRGB (OSD GAMMA adjustment
not available).
Fixed at 2.2 for Adobe RGB (OSD GAMMA adjustment
not available).
Fixed at PROGRAMMABLE (OSD GAMMA adjustment
not available).
OSD Control Menu Functions
page 36