Technical Specifications - HP ProLiant Generation ML310 Quickspecs

QuickSpecs

Technical Specifications

System Unit Dimensions (H x W x D)
(with bezel)
Tower Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
DA - 12858 Worldwide QuickSpecs — Version 17 — 6.10.2008
17.0 x 7.9 x 24.0 in (43.2 x 20.0 x 61.0 cm)
Maximum
(two hard drives, power
supply, and processor
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
Maximum
To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
http://h30099.www3.hp.com/configurator/calc/
Power%20Calculator%20Catalog.xls
- Click on the system of interest. Example: ML310 G5
- Follow the instructions of the next screens.
Rated Steady-State
Power
Maximum Peak Power
Operating
Non-operating
Operating
Non-operating
Operating
HP ProLiant ML310 Generation 5
50 lb (22.7 kg)
33.1 lb (15.0 kg)
90 VAC – 264 VAC
6.5 A (at 100 VAC),
3 A (at 230 VAC)
47 to 63 Hz
<527W @115/230 VRMS
1836 BTU/hr (at 100 VAC),
1706 BTU/hr (at 200 VAC)
400 W (at 100 VAC),
400 W (at 200 VAC)
400 W (at 100 VAC),
400 W (at 200 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Page 29