Table of Contents
Advertisement
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
Figure 7-1 Network dialog box
4)
Double-click "Protocol" from the list of [Select Network Component Type] dialog
box (or click "Protocol" and then click <Add...>) to open the [Select Network
Protocol] dialog box (see Figure 7-2).
Figure 7-2 Select Network Component Type dialog box
5)
Select "Microsoft" from the Manufacturers list in the [Select Network Protocol]
dialog box, double-click "TCP/IP" in the Network Protocols list (or click "TCP/IP",
and then click <OK>) to return to the [Network] dialog box. Then you can see the
TCP/IP item in the section listing the installed network components.
61
7 Appendix – TCP/IP Protocol
Advertisement
Table of Contents
