Remote Access - Huawei Aolynk DR814Q ADSL2+ User Manual

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
Figure 4-17 Change the password
By default, admin and user are the passwords for administrator and common user
respectively.
To change the password, type in the related information in the [Old Password], [New
Password] and [Confirm Password] text boxes, and then click <Apply>.

4.4.3 Remote Access

If remote access is enabled, you can view the current configuration page and manage
the DR814Q remotely.
Click the [Remote] tab of the device setup page to enter the corresponding page shown
in Figure 4-18.
Figure 4-18 Remote access – disabled
By default, the remote access is disabled. You can set the timeout value in the textbox.
Thus, when remote access is enabled, if no remote operation is made, the DR814Q
tracks the elapsed idle time. When the elapsed idle time exceeds the timeout value set
here, the DR814Q will terminate the remote connection to avoid remote attacks. The
idle timeout value is set to 0 by default, that is, not to terminate the remote connection.
4 Web-based Basic Configuration
28