Table of Contents
Advertisement
User Manual
Aolynk DR814Q ADSL2+ Broadband Router
The DR814Q offers a series of Web-based configura
management. You can configure the DR814Q as needed. This chapter guides you to
be familiar with the Web-based configuration pages.
3.1 Prer
equisite Tasks for Configuration
To configure the DR814Q through its bui
as the following.
I.
Sy
stem requirement
A Web browser (Microsof
TCP/IP protocol emplo
II.
IP address of your PC
Before accessing Web-based configuration pages of the DR814Q, you need to
configure your PC as obtaining IP address and DNS server address automatically. If
you assign a static IP address for the PC instead, note to assign an IP address in the
same network segment as the DR814Q. T
DR814Q Ethernet port are 192.16
section 7 "Appendix
III.
No proxy server
If your PC uses the proxy server to access the Internet, you must disabl
service.
1)
Choose [Tool/Internet options] to open the [Internet option
2)
Click the [Co
3)
Make sure th
IV. Import
1)
The DR814Q provides the automatic dialing function, thus
(PPPoE dialing software, for example) provided b
client dialing software is not needed and can be uninstalled.
s on your PC
t Internet Explorer 5.5, Netscape 6.0 or later)
yed
– TCP/IP Protocol".
nnections] tab and click <LAN settings...>.
e Use a proxy server option is not selected.
ant
3
Getting Started
tion pages for configurations and
lt-in Web pages, you must configure your PC
he default IP address and subnet mask of the
8.1.1 and 255.255.255.0 respectively. Refer to
y the operation system or other
8
3 Getting Started
e the proxy
s] window.
the dialing software
Advertisement
Table of Contents
