Ice Maker Function - Kenmore 795.77562600 Service Manual

3-2. Ice Maker Function

1. Operation Principle of icemaker
Power On
Start Position
Icemaking
Mode
Harvest
Mode
Park Position
Fill
Test Mode
(1) Turning the Icemaker stop switch off (O) stops the ice making function.
(2) Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
Cube Size
Indicator Light
• Adjusts EJECTOR to Start Position with power on.
• Waits until water becomes ICE after starting the
icemaking operation.
• Runs MOTOR to drop ice from the tray into the ICE BIN.
(During harvest mode, check if the ice bin is full.)
• Reaches Start Position
• Performs Ice Making Mode after supplying water by operating
the SOLENOID in ICE VALVE.
• To operate LINE and SERVICE, press and hold the Cube Size button
for 3 seconds. The icemaker will run through 3 stages:
Harvest Fill Icemaking.
Cube Size
Selection Button
- 9 -
EJECTOR
Automatic
Shut off Arm
Power
Switch