Installing The Pci Express I/O Expansion Board - HP ProLiant DL585 G7 User Manual

Install the shipping screw.
6.
Close the expansion slot retainer.
7.
Install the access panel (on page 27).
8.
Slide the server back into the rack.
9.
Power up the server (on page 25).
10.
Resume normal server operations.
11.

Installing the PCI Express I/O expansion board

CAUTION:
all expansion slots have either an expansion slot cover or an expansion board installed.
IMPORTANT:
configuration, processor 2 and the I/O enabler must be installed.
Power down the server (on page 25).
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel (on page 26).
3.
To prevent improper cooling and thermal damage, do not operate the server unless
When either optional I/O expansion board is installed in a two-processor
Hardware options installation 57