System Mode Parameter Set; Profile Mode Parameter Set - Cisco 700 Series Configuration Manual

All profiles are based on the profile template and inherit the system-level values. When you
create a new profile, its default values are taken from the profile template.

System Mode Parameter Set

System mode parameters affect the router as a system. Table 2-1 lists the system
parameters.
Table 2-1
Caller ID parameters
Date and time
Directory number(s)
Delay time
Forwarding mode
Multidestination dialing
Numbering plan
Patterns
Passthru
PPP authentication
1 PPP = Point-to-Point Protocol
2 SNMP = Simple Network Management Protocol
3 SPID = service profile identifier

Profile Mode Parameter Set

Changes made to profile mode parameters in system mode affect the profile template.
When a profile is created, it inherits the matching system mode parameters from the profile
template. Any changes to parameters in profile mode apply only to that profile. Changes
made to profile parameters in system mode are stored in the profile template. When you use
the set user command to create a user-defined profile, the default parameters for the new
profile are taken from system mode.
System Parameter Set
Call waiting
Country group
Address age time
Local and remote access
Phone 1 and 2
PPP client password
PPP client secret
Voice priority
Compression
System Mode Parameter Set
1
PPP parameters
Screen length
Screen echo
2
SNMP parameters
3
SPIDs
Switch type
System password
Power Source 1 detect
System name
Using Profiles with Cisco 700 Series Routers 2-3