Ip Static And Ipx Static Routing With Chap And Mlp - Cisco 700 Series Configuration Manual

IP Static and IPX Static Routing with CHAP and MLP

IP Static and IPX Static Routing with CHAP and MLP
This section describes how to configure the central site Cisco 4500 series router and
Cisco 765 series router for Internet Protocol (IP) static and Internetwork Packet Exchange
(IPX) static routing with Point-to-Point Protocol (PPP) using CHAP and MLP.
Figure 4-5 is an illustration of the configuration used in this example.
Figure 4-5 IP Static and IPX Static Routing with PPP
Serial interface
IP address: 172.16.125.7
IP subnet mask: 255.255.255.0
IPX network: 32125
Ethernet interface
IP address: 192.168.147.9
IP subnet mask: 255.255.255.248
IPX network: 1478
Telecommuter PC
IP address: 192.168.147.8
4-10 Cisco700 Series Router Configuration Guide
Serial interface
IP address: 172.16.125.1
IP subnet mask: 255.255.255.0
IPX network: 32125
ISDN network
765
Remote router
IPX address:
32125: 0040f9cfd5
ISDN number: 5553693/4
User profile name: 4500
Ethernet interface
IP address: 172.18.124.2
IP subnet mask: 255.255.255.0
IPX network: 48124
4500
Central site router
IPX address:
32125: 0c08af65
ISDN number: 5558011/2
Host name: 4500
IPX file server
IPX internal
address:
3039e670
Central site network
IP network: 172.18.124.0