Remote Cisco 765 Command Summary - Cisco 700 Series Configuration Manual

Remote Cisco 765 Command Summary

Following is the command summary for configuring the remote Cisco 765 series router for
IP unnumbered routing with CHAP authentication and MLP:
set switch 5ess
set system 765
set multidestination on
set ppp multilink on
set ppp authentication incoming chap
set ppp authentication outgoing chap
set ppp secret client
set ppp secret host
cd lan
set ip address 192.168.147.9
set ip netmask 255.255.255.248
set ip routing on
set ip rip update periodic
set ip rip receive v2
set ip rip version 2
set user 4500
set ppp secret client
set ip rip update off
set ip routing on
set ip framing none
set ip route destination 0.0.0.0 gateway 0.0.0.0
set number 5558011
set bridging off
set ppp secret host
set timeout 360
set active
reboot
For detailed information regarding the commands listed here, refer to theCisco 700 Series
Router Command Reference.
Remote Cisco 765 Command Summary
Using CHAP 4-9