Rack Mounting The Switch 2520G-8-Poe - HP ProCurve 2520G-PoE Series Installation And Getting Started Manual

N o t e
8 mm
M4 screws
N o t e
W A R N I N G

Rack Mounting the Switch 2520G-8-PoE

Requires optional mounting bracket kit (not included).
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Figure 2-5. Attaching mounting brackets
The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so that its front face is flush with the face of the rack, or mounting it
in a more balanced position.
For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
Installing the Switch
Installation Procedures
2-11