Table of Contents
Advertisement
Connection of CH70 Rx Antenna
Connection of Handset
Grounding the Transceiver Unit
Figure 6 How to attach the M-type plug to the coaxial cable
The CH70 Rx antenna is connected to the duplexer unit with a 50
ohm coaxial cable, type 5D-2V. Attach an M-type plug to the cable
(if necessary) as shown in Figure 6. Screw the plug into the CH70
ANT connector at the buttom of the duplexer unit.
Connect the handset cable to the HANDSET port on the rear of the
tranceiver unit.
Fasten a ground wire (local supply) between the GND terminal at the
rear of the transceiver unit and ship's hull (or ground bus).
CAUTION
Ground the equipment to
prevent electrical shock
and mutual interference.
13
Hide quick links:
Advertisement
Table of Contents
