Introduction To The Excalibur System - Omega Excalibur AL-1000-E Owner's Manual

Introduction to the Excalibur Vehicle Security System
Pressing the "lock/arm" and "unlock/disarm"
buttons together activates the 3rd channel output.
Pressing and releasing the
"arm/lock" button arms the
security system and locks the
doors.* Pressing
holding this button for three
seconds will first arm, and
then activate the Panic feature,
locking the doors.
Pressing the "II" button for two
seconds can be used to activate
an extra output, or "2nd
channel", for an optional
function such as trunk release.
Pressing and releasing this
button twice arms or disarms
the system without the
confirmation chirps.
*
The Excalibur system must be connected to existing
power doorlocks. In some cases, this may require optional
parts or labor.
Lights when
transmitting.
and
Pressing and releasing the "disarm/
unlock" button disarms the system
The red "III" button is multi-functional-it may
be programmed activate the Panic feature, without
locking or unlocking the doors, or instead it can
operate the 3rd channel output.
Page - 4
and unlocks the doors unless
the system is activated. The
unlock operation may be
configured so that pressing this
button once disarms the system
and unlocks only the driver's
door, and pressing a second
time unlocks all of the doors.
Pressing and holding this
button for three seconds will
first disarm, and then activate
the Panic feature, unlocking the
doors.