Cisco CallManager Release 3.0(10 Specification page 93

Table 11 CMI Service Parameters Not Included in Release 3.0 Documentation (continued)
ParamName
Parity
RouteFilter
SerialPort
78-13493-02
Description
Cisco CMI connects to the voice mail system via an EIA/TIA-232
connection. This parameter defines that connection.
Recommended default value: Even
Note
CMI requires this parameter is one of four required to register an
intercept for the voice mail system with which CMI is going to work.
Note
Cisco CMI connects to the voice mail system via an EIA/TIA-232
connection. This parameter defines that connection.
Recommended default value: COM1
Note
Release Notes for Cisco CallManager Release 3.0(10)
The parity settings can be None,
Even, Odd, Mark, or Space.
Settings are usually Even and
None, with Mark and Space
rarely being used. Just using the
first character of the parity name
also works.
Small systems without a
complex dialing plan usually
only need the VoiceMailDn
parameter. The remaining
parameters, DialingPlan,
RouteFilter, and
VoiceMailPartition, will default
to empty strings.
The SerialPort name should be
the same name that you see in
Device Manager under NT.
Documentation Updates
93