Cisco CallManager Release 3.0(10 Specification page 87

Table 9 Cisco CallManager Service Parameter Updates
ParamName Values
MaxCTI Default: 400
Connections
MaxStationsInitPe Default: 10
rSecond
78-13493-02
Description
Designates the maximum number of CTI
connections. Cisco CallManager allows a
maximum number of CTI connections.
Typically, each CTI application (or
instance of the application) has a single
CTI connection to the
Cisco CallManager; for example, each
Softphone instance has a single CTI
connection to the Cisco CallManager.
This limit on the number of CTI
connections is independent of the number
of CTI devices that the application can
control.
Designates throttling the number of
phones allowed to concurrently register
with Cisco CallManager without being
queued. Parameter as an integer value
ranges usually between 5 and 15.
If the performance value is set
Note
too high, phone registrations
could slow the
Cisco CallManager real-time
response. If set too low, the
total time for a large group of
phones to register will be
slow.
Release Notes for Cisco CallManager Release 3.0(10)
Documentation Updates
87