Cisco CallManager Release 3.0(10 Specification page 89

Table 9 Cisco CallManager Service Parameter Updates
ParamName Values
StopRoutingOnUn Default: F
allocatedNumberF
lag
StopRoutingOnUs Default: F
erBusyFlag
TosBitPosition Default: 3
VoiceMailMaximu Default: 12
mHopCount
78-13493-02
Description
Specifies when set to true, that if a call
being routed through a route list detects
the associated "cause" during the release
of the call, no re-routing to the next
device in the route list is attempted and
the call is released with the associated
cause.
Specifies when set to true, that if a call
being routed through a route list detects
the associated "cause" during the release
of the call, no re-routing to the next
device in the route list is attempted and
the call is released with the associated
cause.
Allows setting a bit between bit 0 and bit
4 along with IPTOS settings to make it
compatible with Cisco DIFF-SERV
(Differentiated Service).
Used together with
AdvancedCallForwardHopFlag, allows
the Cisco CallManager to select the next
available voicemail port by skipping the
busy or unregistered voicemail ports.
Set
Note
VoiceMailMaximu
mHopCount to the
number of
voice-mail ports in
the system.
Release Notes for Cisco CallManager Release 3.0(10)
Documentation Updates
89