Cisco CallManager Release 3.0(10 Specification page 32

Resolved Caveats
Resolved Caveats - Release 3.0(9)
Note
Table 3 Cisco CallManager Release 3.0(9) Resolved Caveats
DDTS Number Summary
CSCdr43740 An error code incorrectly displays for
invalid route filter deletes.
CSCdr79073 AVVID: DisplayIEDeliveryFlag=True
causes no connection to be made
through T1 CAS.
CSCdr82850 Alerting message from JTAPI is
delayed less than 2 seconds.
CSCdr91539 Messages button on Cisco IP Phone
7900 exhibits incorrect behavior with
multiple MWI.
Release Notes for Cisco CallManager Release 3.0(10)
32
Table 3 lists and describes Caveats that were resolved in Cisco CallManager
Release 3.0(9)
If you have an account with Cisco.com (Cisco Connection Online), you can
use the Bug Toolkit to find caveats of any severity for any release.
To access the Bug Toolkit, log on to http://www.cisco.com/support/bugtools.
Explanation
Error code: 263720 "delete failed" displays
when a route filter that is in use by devices
is being deleted. This type of error message
does not appear for similar devices when
they are in use by a device and are being
deleted. An error message such as "Cannot
delete ____ because (#) of devices are using
it..." displays. Use this type of error
message for Route Filters too. A
Cisco CallManager code change corrects
this error message.
A Cisco CallManager code change corrects
this behavior.
A code change and configuration issues
corrects this behavior.
When a phone has multiple directory
numbers with voice mail, then while
retrieving the voice mail, the order was
Bottom _ Up. The correct order is Top-
Down.
78-13493-02