Chicago Electric 90186 Assembly And Operating Instructions Manual page 7

Always turn off the Circular Saw and unplug it from its electrical outlet
18.
before changing accessories or performing any inspection, maintenance, or
cleaning procedures.
19. WARnInG
possible conditions and situations that may occur. It must be under stood by the
operator that common sense and caution are factors which cannot be built into
this product, but must be supplied the the operator.
20.
WARnInG
drilling, and other construction activities contain chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement and other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies depending on
how often you do this type of work. To reduce your exposure to these chemicals
work in a well ventilated area, and work with approved safety equipment such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5 et seq.)
21.
WARnInG
ing this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualfified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1. Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity aways from the user, reducing the risk of
electric shock. (See Figure A, next page.)
SKU 90186
The warnings and cautions discussed in this manual cannot cover all
Some dust created by power sanding, sawing, grinding,
People with pacemakers should consult their physician(s) before us-
outlet installed by a qualified electrician.
WARnInG
PAGE 7