Specific Safety Rules - Chicago Electric 90186 Assembly And Operating Instructions Manual

Check for misalignment or binding of moving parts, breakage of parts, and
22.
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
Use only accessories that are recommended by the manufacturer for your
23.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
Tool service must be performed only by qualified repair personnel. Service
24.
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow
25.
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
Maintain a safe working environment. Keep the work area well lit. Make sure
1.
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Circular Saw in
areas near flammable chemicals, dusts, and vapors.
Maintain labels and nameplates on the Circular Saw. These carry
2.
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
To avoid serious personal injury and/or property damage, always
3.
WARnInG
use Saw Blades (part #3) that are rated at 4500 RPM or greater on this par-
ticular Circular Saw.
Replace a dull or damaged Saw Blade (part #3) immediately.
4.
Always wear a safety impact full face shield, hearing protection, and heavy
5.
duty work gloves when using this product. A safety impact full face shield,
hearing protection, and heavy duty work gloves are available from Harbor Freight
Tools.
Keep all guards in place and working properly.
6.
SKU 90186
SERVICE

SPECIFIC SAFETY RULES

PAGE 5