Other Error Messages - Canon JX510P User Manual

Cause
The printer port is not configured
appropriately.

Other Error Messages

Cause
One of the following Windows error
messages is displayed outside the
printer status monitor.
Follow the procedure below to check the status of the device.
(1)Click Control Panel, Hardware and Sound, then Device Manager.
If the User Account Control screen is displayed, follow the on-screen
instructions.
In Windows XP: Click Control Panel, Performance and Maintenance,
System, then click Device Manager on the Hardware
sheet.
In Windows 2000: Click Control Panel, System, then Device Manager on
the Hardware sheet.
(2)Double-click Universal Serial Bus controllers then USB Printing Support.
If USB Printing Support is not displayed, make sure that the machine is
correctly connected to the computer.
See "The machine is not connected properly." on page 90.
(3)Click the General tab and make sure that there is no indication of a problem
with the device.
If a device error is displayed, refer to Windows help to resolve the error.
If an error message is displayed outside the printer status monitor, check the
following:
"Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the
disk.
"Could not spool successfully due to insufficient memory"
Quit other running applications to increase available memory.
If you still cannot print, restart your computer and retry printing.
"Printer driver could not be found"
Uninstall the printer driver according to the procedure described in the On-
screen Manual, and then reinstall it.
"Could not print Application name - File name"
Try printing again once the current job is complete.
Action
Action
Troubleshooting 91