Error Codes, Messages And Solutions - Canon B150 User Manual

Error codes, messages and solutions

The following table summarises the error codes that appear on Activity reports (see
p. 87), the displayed messages and what to do for each error.
Message
BUSY/NO SIGNAL
CHANGE CARTRIDGE
CHECK REC PAPER
CHK. FRONT COVER
CHECK DOCUMENT
110
Error Code Cause
#005/018 The telephone number you
dialled is busy.
The other party's fax is not
working.
The other party is not using
a G3 machine.
The touch tone/rotary pulse
setting on your fax is
incorrect.
The receiving fax did not
answer within 35 seconds.
- The BJ cartridge is empty or
the ink has dried out.
#009 No paper in the fax or there
is a paper jam.
- The front cover is open.
#001
Document is jammed.
Action
Try sending the document at
a later time.
Contact the other party and
have them check their fax.
Contact the other party and
have them send or and have
them send or receive the
document using a G3
machine.
Set your fax to the setting
that matches your telephone
line. (See p. 16)
Contact the other party and
have them check their fax.
You can try to send the
document send the
document manually. For an
overseas manually. For an
overseas manually. For an
overseas call, add pauses to
the registered number. (See
p. 29)
Replace the BJ cartridge.
(See p. 103)
Add paper or clear the jam,
then press [STOP]. (See p. 7)
Close the front cover.
Remove the document and
start again. (See p. 98)