Tape Playback; Basic Operations - Aiwa Z-M260 Operating Instructions Manual

TAPE PLAYBACK

BASIC OPERATIONS

INSERTING TAPES
Use Type I (normal), Type II (high/CrO2) or Type IV (metal) tapes
for playback.
Press the TAPE button and press the fEJECT mark
to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode on Deck 2
Each time the REV MODE button is pressed, the reverse mode
changes.
To play one side only, select A.
To play from front side to reverse side once only, select F.
To play both sides repeatedly, select G.
• When tapes are loaded in both decks, F on the display
indicates Continuous Play.
• On Deck 1, tapes are always played back on both sides once.
9
ENGLISH
PLAYING BACK A TAPE
Insert a tape.
1 Press the DOLBY NR button and turn Dolby NR
on or off to match the playback tape.
<NR
For tapes recorded with DOLBY NR, turn on <NR.
For tapes recorded without DOLBY NR, turn off <NR.
2 Press the k button to start play.
The tape counter indicates the
tape running length.
Playback side of the tape
=: The front side is being played (forward).
|: The back side is being played (reverse).
When tapes are loaded in both decks
Press the TAPE button first to select a deck.
The selected deck number is displayed.
To stop play, press the a button.
To pause play (Deck 2 only), press the b button. To resume
play, press again.
To change the playback side, press the k
PRESET button in play or pause mode.
To fast forward or rewind, press the c or d button in
stop mode. Then press the a button to stop the tape.
To start play when the power is off (Direct Play Function)
Press the TAPE button. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press the aCLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
Tape deck number
being played
k DIRECTION/ k k k