Specifications - Aiwa Z-M260 Operating Instructions Manual

SPECIFICATIONS

Main unit CX-ZM260
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W × H × D)
Weight of main unit
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz
step)
350 µV/m
Loop antenna
100 watts per channel, Min.
RMS at 6 ohms, from 50 Hz to
20 kHz, with no more than 1 %
Total Harmonic Distortion
0.05 % (25 W, 1 kHz, 6 ohms,
DIN AUDIO)
VIDEO/PHONO/AUX: 240 mV
(adjustable)
MIC 1, MIC 2: 3.4 mV (20
kohms)
SUPER WOOFER: 2.2 V
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accept speakers of 16 ohms or
more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
CrO tape: 50 Hz – 16000 Hz
2
Normal tape: 50 Hz – 15000 Hz
60 dB (Dolby B NR ON, CrO
2
tape peak level, above 400 Hz)
AC bias
Deck 1: Playback head × 1
Deck 2: Recording/playback/
erase head × 1
Semiconductor laser (λ = 780
nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.03 % (1 kHz, 0 dB)
Unmeasurable
120 V AC, 60 Hz
115 W
360 × 394.5 × 372.5 mm (14 ×
1
/
4
× 14
5 3
15 / / in.)
8 4
11.7 kg (25 lb 12 oz.)
Speaker system SX-Z26
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W × H × D)
Weight
Specifications and external appearance are subject to change
without notice.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol < are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
3 way, bass reflex
Woofer:
220 mm cone type
Tweeter:
80 mm cone type
Super tweeter:
20 mm ceramic type
6 ohms
90 dB/W/m
260 × 444 × 270 mm (10 ×
1 /
4
× 10
17 1 / 3 / in.)
2 4
4.8 kg (10 lb 9 oz.)
22
ENGLISH
En
C
A