Presetting Stations - Aiwa Z-M260 Operating Instructions Manual

PRESETTING STATIONS

The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the gDOWN or hUP button to
tune in to a station.
2 Press the b b SET button to store the station. b b
b
A station is assigned to a preset number, beginning from 1 in
consecutive order for each band.
Frequency
Preset number
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored for both the bands.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press the TUNER/BAND button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the kDIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next higher number is
selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numeric buttons. Then, press the aCLEAR button, and press
the bSET button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
En
C
8
ENGLISH