Wiring; Display Unit - Furuno FR-2135S Installation Manual

2.1 Display Unit

Fabricating the power cable DPYCY-3.5 (JIS cable)
1. Remove the vinyl sheath by 80 mm.
2. Cut off jute tape wrapped around the armor.
3. Unravel the armor to expose the cores by about 35 mm.
4. Remove insulation of cores by about 10 mm. Fix crimp-on lugs to the cores and
armor.
5. Cover the armor with vinyl tape, leaving the portion which will lie inside the
cable clamp untaped.
Figure 2-1 Fabrication of power cable DPYCY-3.5 (JIS cable)

WIRING

(a)
DPYCY-3.5
About 80 mm
Vinyl sheath
40 mm
(b)
(c)
Lay this part in cable clamp.
(d)
Core
2
S = 3.5 mm
= 2.4 mm
DPYCY-3.5 sectional view
5 mm
Armor
10 mm
Taping
Armor
Vinyl
sheath
2-1