Specifications & Performance Claims - Kenmore 625.382080 Owner's Manual

This system has been tested according to NSF/ANSI 42 for the reduction of chlorine taste and odor. The concentra-
tion of the indicated substance in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI 42.
While testing was performed under standard laboratory conditions, actual performance of the system may vary based
on local water conditions.
SPECIFICATIONS
Model Code
Rated Service Flow Rate
Pressure Drop at Rated Service Flow
Pressure Drop at 9.6 gpm
Supply Water Pressure Limits (minimum / maximum)
Supply Water Temperature Limits (minimum / maximum)
Maximum Drain Flow Rate
0.50 ppm
0.75 ppm
Rated Capacity at Chlorine Concentration** of: 1.0 ppm
1.5 ppm
2.0 ppm
25-30 micron particle size
Sediment Removal with: 30-40 micron particle size
40 micron particle size or larger
Model No. 625.382080
dF1
6.0 gpm
10 psig (68.9 kPa)
15 psig (103.4 kPa)*
30 - 125 psi
(206.8 - 861.8 kPa)
40 - 120 OF (5 - 49 °C)
3.4 gpm
2,280,000 gal.*
1,520,000 gal.*
1,140,000 gal.*
760,000 gal.*
570,000 gal.
89.9% or greater
96.4% or greater
99.4% or greater
* From independent laboratory test data.
** Typical residential chlorine concentration is 0.5 to 1.0 ppm.
This system conforms to NSF/ANSI Standard 42 for the specific performance claims as veri-
fied and substantiated by test data.
Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts
requires installation be performed by a licensed plumber. Plumbing code 248-CMR of the
Commonwealth of Massachusetts must be followed in these cases.
PERFORMANCE CLAIMS
Re_uctl_n u! _em A': er_ge _ercent Re_
Chlorine 2.0 4-10% mg/L 50% 82.8%
Model No.
Serial No.
For future reference, enter the following information.
Installation Date
Model No. and Serial No. are on the shipping carton and on the registration decal on the Central Water
Whole Home Filtration System.
22
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com