Table of Contents
Advertisement
Supply water pressure limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-100 psi (207-689 kPa)
Supply water temperature limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-100 °F (5-40 °C)
Inlet - Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8" Quick Connect fittings & tubing, included
This system conforms to NSF/ANSI 42 for the specific performance claims as verified and substantiated by test
data.
Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires instal-
lation be performed by a licensed plumber. Plumbing code 248--CMR of the Commonwealth of Massachusetts
must be followed in these cases.
Problem: Taste and/or Odor.
Cause: Filter cartridges expended.
Cause: System contaminated.
Problem: Faucet LED indicator light does not function after battery change.
Cause: Battery dead.
Cause: Battery installed incorrectly.
Problem: Water leaks at push connect fittings.
Cause:
Tubing not pushed in all the way.
Cause: Tubing not cut square.
Cause: Tubing nicked.
Cause: Outer tubing surface not smooth.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
12
Specifications
Troubleshooting
Correction: Replace the filter cartridges. See Pages 10 & 11
Correction: Sanitize system. Call 1-800-426-9345 for instructions.
Correction: Replace with new battery. See Page 9.
Correction: Install battery correctly.
.
Correction: Push Tubing all the way into fittings. See Page 8.
Correction: Cut tubing square. See Page 8.
Correction:
Correction:
Remove tube from connection. Remove nicked portion
by cutting tube to shorter length. Reinsert in connection
See Page 8.
Remove tube from connection. Remove problem area
by cutting tube to shorter length. Reinsert in connection
See Page 8.
.
Advertisement
Table of Contents
