Pile Height Selection And Setting; Check Bag Indicator - Kenmore 116.31100 Use & Care Manual

PILE HEIGHT SELECTION AND SETTING
To select a plfe heighf sefffng:
Turn off vacuum cleaner. Select a pile
height setting by tilting the cleaner back
until the front wheels are tiffed slightly
Off the floor.
Slide the adjustment lever to the correct
. setting.
i There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning (with agitator OFF), and the
HIGH setting for high-pile carpets like
shag carpet, scatter rugss etc. Use the
other settings as needed for carpet
heights in between.
Pile Height
Adjustment
CHECK BAG INDICATOR
When the vacuum cleaner is running with
norrnal air flown the light on the CHECK
BAG indicator is off. The light comes on
whenever the airflow becomes blocked. If
that occurs, check the disposable dust bag,
motor safety filter and other possible clog
locations shown in CLOG REMOVAL.
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain
attachments, due to reduced airflow
through attachment. No maintenance is
required.
CHECKBAG
11