PILE HEIGHT SELECTION
To select a pile height setting:
Select a pile height setting by pressing
the HEIGHT ADJUST bulton on the side of
the nozzle° The pile height setting shows
on the indicator window° See SUGGESTED
PILE HEIGHT SETTINGS,
Refer to your carpet manufacturers
with the agitator lurned
off, to prevent carpet damage°
SUGGESTED PILE HEIGHT SETTINGS
There are four (4) pile height settingson
the vacuum c_eaner. For best deep down
cleaning, use the XLO setting. However,
you may need to raise the height to make
some jobs easier, suchas scatter rugsand
some deep pile carpets, and to prevent
the vacuum cleaner from shutting off.
Suggested settings are:
HI - Shag, deep pile, or scatter rugs_
MED - Medium
to deep pile.
LO - Low to medium pile.
XLO - Most carpets. Also, use XLO with
setting for bare floors
and delicate carpets.