Hose And Wand - Kenmore 116.31100 Use & Care Manual

ATTACHMENT ASSEMBLY
HOSE AND WAND
1. Insert the tab on
the telescopic wand
into the "J" slot on
the hose handle.
Twist the telescopic
wand to lock in
place,
2. Place the telescop_
ic wand in the wand
holder and route the
hose as shown.
0
Hose
Raised
Edge
Hose
Handle J
HoseX_\_
Handle_ _
"J"
Slot_ _
e
Telescopic
the
, into the hose
holder located
on the handle
of the vacuum
cleaner.
NOTE: fie sure
the raised
edge of the
hose handle
rests against
edge of the
hose holder.
4. Rotate the
hose release
lever down
and route the
hose as Hose
shown.
5. Snap the
hose into the Telescopfc
hose cuff on
the side of Wand
the vacuum
cleaner Hose
ReleaseI
I
6. Rotate the hose
_ elease lever
upwards to lock
the hose in place.
A ,u,,o, . j
Do not operate the agitator without theJ
wand properly inserted into the wand| _
holder and the hose handle properly|
secured in the h°se h°lder J
7