Kenmore 116.31100 Use & Care Manual page 19

[
Hinge Pin
Dust Bag
Hinge Pin
Cover
To reinstall or replace dust bag cover.
1. Align dust bag cover hinge pin with
hinge pin
hole in dust container.
2. Rotate dust bag cover into place.
3. You should hear a noticeable click
when hinge pin snaps into place.
Dust Bag
Cover
To maintain efficient cleaning, the agita-
tor must be kept free of carpet fiber,
string, or hair build-up. After every 7 to
I0 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and
hair build-up.
. Use scissors to remove any build-up
entangled around the agitator.
Always follow all safety precautions when
performing maintenance, to the vacuum
cleaner.
,i i ill ,,,,,, iHl_
I_WARNING
Electrical Shuck Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
the vacuum cleaner suddenly starting.
,i
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bag is full or if a filter is clogged.
See DUST BAG REPLACEMENT section.
If the dust bag and filter areas are free of
clogs, check the extension hose.
19