Pile Height Selection Andsettings; Dirt Sensor; Operation - Kenmore 116.31150310 Use & Care Manual

Hide thumbs

Advertisement

PiLE HEIGHT SELECTION ANDSETTINGS
Select
a pile height
setting
by turning
the
height
adjust
selector
located
on the
nozzle.
SUGGESTED
PILE HEIGHT
SETTINGS
There are five (5) pile height
settings on
the vacuum
cleaner.
For best deep
down
cleaning,
use the LO setting.
However,
you
may need to raise the height
to make
some jobs easier,
such as scatter rugs and
some deep
pile carpets,
and to prevent
the vacuum
cleaner
from shutting off.
Attention: Refer to your carpet
manufacturers
cleaning
recommendations.
Some more delicate
carpets may require that they be
vacuumed with the agitator turned off to
prevent carpet damage.
Suggested
settings
are:
HI - Shag,
deep pile, or scatter rugs.
MED HI - Medium
to deep
pile.
"l"
= Medium
pile.
MED LO - Low to medium
pile.
LO - Most carpets,
bare floors combined
with FLOOR power switch
setting,
delicate
carpets
that require agitator
to
be turned
off.
I
AUTION
_Do not allow
vacuum
cleaner
to remain
_in one spot for any length
of time when
_the agitator
is turning.
Damage
to carpet
may occur.
DIRT SENSOR
The electronic
dirt sensor is a feature
which will detect
particles
as they pass
through
the vacuum
cleaner.
The dirt sensor indicator
is located on the
nozzle of the vacuum cleaner.
* When little or no dirt is present the
dirt sensor is off.
With medium or heavy concentration
the dirt sensor is on,
OPERATION
As you vacuum,
the indicator
light
wilt
come on and stay on as long as the
sensor detects
a high concentration
of
particles
passing through
the vacuum
cleaner.
To clean dirt sensor optics see
page
]5.
Dirt
- 10 -

Advertisement

loading

This manual is also suitable for:

116.31150311