Download  Print this page

Dust Cup Cleaning - Kenmore COIZDMWOOU00 - KC01ZDMWZOUO Use & Care Manual

Hide thumbs

Advertisement

Table of Contents
i
DUST CUP CLEANING
]
TO DISASSEMBLE DUST CUP
Remove dust cup from vacuum cleaner
(See DUST CUP EMPTYING)
and empty
contents,,
!_ Rotate upper dust
cup to unlock, then
lift off°
3_ Press the lid
release button
downward
and
twist lid to remove
from dust cup
5. Remove upper
portion of dust cup
from air guider
6o Rinse with cold water
only, DO NOT use
detergent or soap°
Allow parts to dry 24
hours before putting
back into vacuum
c_eaner.
2o Remove pre-filter
by
pulling downward
as shown°
See PRE-FILTER CLEANING
4o Rotate fastener ring
to unlock, and lift off,
DO NOT wash in the dishwasher.
DO NOT install parts damp.
TO ASSEMBLE DUST CUP
t_ Reinstall upper portion
of dust cup onto air
guide so that the
locking screws
pass through
the holes inthe
upper porlton_
2o Using alignment marks
on the fastener ring and
dust cup, place fastener
ring onto dust cup and
rotate to lock in place,
3o Place the dust cup
lid on the upper
portion of the dust cup
using altgniment s!ots,
and rotate until the lid
locks in place°
4, Reinstall pre-filter
by using the
alignment ribs on the
pre-filter
to align with
the ribs on the upper
portion of the dust
cup_
5o Pressinto place. A
noticeable "click"
shouldbe heard_
6. Reinstall lower
portion of the dust cup
by aligning ribs on the
upper portion with the
UNLOCK
ribs on the
lower portion.
7, Rotate until ribs
from the upper portion
of the dust cup align with the LOCI{ ribs.
NOTE' If lower portion of dust cup does
not fit properly check pre-filter
installationinstep 4o
1B

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.31811