Erasing Waypoints; Setting/Canceling Destination Waypoint - Furuno GP-1600F Operator's Manual

2.9 Erasing Waypoints

2.10 Setting/Canceling Destination Waypoint

2 – 12
The GP-1600F provides two ways by which you can erase
waypoints:
• by the cursor, or
• through the waypoint list.
Erasing waypoints by the cursor
1) Press the [CURS] key to turn on the cursor.
2) Operate the [Arrow] keys to place the cursor on the waypoint
you want to erase.
3) Press the [CLR] key.
Erasing waypoints through the waypoint list
1) Press the [WPT] key.
2) Press the [ ] key to select WPT List.
3) Press the [NU/CU ENT] key. The waypoint list appears.
4) Press the [ ] or [ ] key to select waypoint number.
5) Press the [CLR] key. The confirmation window appears.
6) Press the [NU/CU ENT] key.
The GP-1600F offers three methods by which you can set destina-
tion:
• by waypoint in waypoint list
• by event list (discussed later in this chapter)
• by route list (discussed later in this chapter).
When you select a destination waypoint, range and bearing from
own ship to that point appear at the bottom of the display.
Setting destination by waypoint number
1) Press the [GOTO] key.
The following menu appears.