Erasing Routes - Furuno GP-1650 Operator's Manual

DGPS 3D
SAVE icon
Figure 6-9 SAVE icon appearance
on the plotter display
7. Press the [SAVE/MOB] key with a touch-
and-release action to enter a waypoint
mark at own ship position. A new waypoint
is created under the next consecutive
waypoint number and that waypoint is
added to the route.
8. Repeat step 7 as necessary. 35 waypoints
can be entered.
9. Press the [WPT/RTE] key followed by the
soft key CREATE VOYAGE BASED
ROUTE.
10.Press the soft key FINISH LOG to regis-
ter the route. The SAVE icon disappears.

6.5 Erasing Routes

1. Press the [WPT/RTE] key followed by the
soft key ROUTES to open the route menu.
2. Press or to select a route you want
to erase.
3. Press the soft key ERASE ROUTE. You
are asked if you are sure to erase the
route.
4. Press the [ENTER] key to erase the route.
NORTH
UP
ZOOM
IN
ZOOM
OUT
COURSE
UP
NAV
S A
L/L
V E
6-5