Furuno GP-1650 Operator's Manual page 65

Download waypoint/route to PC
1. Connect the PC to the equipment as
shown below.
2. Press the soft key labeled DOWNLOAD
WPT/RTE TO PC. You are asked if you
are ready to download waypoints and
routes.
3. Press the [ENTER] key to download.
GP-1650/1650D
DGPS
1 NC
2 NC
3 RD (YELLOW)
4 NC
5 SD (RED)
6 SG (BLUE)
7 SHIELD
Figure 10-17 Connection of GP-1650D/GP-1650 to PC
Upload waypoint/route from PC
Note that all waypoint and route data stored
in your unit will be deleted when data is up-
loaded.
1. Connect the PC to the equipment as
shown below.
2. Press the soft key labeled UPLOAD WPT/
RTE FROM PC. You are asked if you are
ready to upload waypoints and routes.
3. Press the [ENTER] key to upload.
PC/AT
DSUB 9-pin
(EIA-574)
3 (TxD)
2 (RxD)
5 (GND)
4 (DTR)
6 (DSR)
7 (RTS)
8 (CTS)
PC/AT
DSUB 25-pin
(EIA-232)
2 (TxD)
3 (RxD)
7 (GND)
4 (DTR)
5 (DSR)
6 (RTS)
20 (CTS)
10-9