Table of Contents
Advertisement
MENU 4
* MENU 4 *
Jan/15/1997
MENU MODE
(Note 1)
TIME DATA
WT SPEED
(Note 2)
(Note 3)
NAV FORMAT
(Note 4)
NAV AID
(Note 5)
NAV DATA
TIME INT
(Note 6)
CRS CAL MODE
(Note 7)
CRS CAL EXEC
TIDE OUT INT
(Note 8)
1Press
MENU
key to store (validate) the settings and to close the menu window.
2Selection of date/time display by internal clock (CI-35/35H) or external navigator's clock
(GPS)
3Selection of tracking mode when ground tracking unattainable (water tracking or nav-aided)
4Selection of communication data format with external navigator (Furuno CIF or NMEA0183)
5Selection of source navigator to receive spd/pos data
6Selection of source data for ship's speed/direction display in nav-aided mode
7Averaging time for converting position change into speed/data(1 to 10 min in 1 min steps,
effective only when selected "L/L" as NAV DATA above)
8Selection of method for automatic cource calibration calculation and calibration mode to use
"GT":
Calculates course calibration angle to equalize ground tracking course to that of
external navigator after 2 mile run.
"NAV": Calculates course calibration angle to equalize tides before and after 10 minute
period.
"MAN": Calculates course by using value entered manually in MENU 3-COURSE CALIB.
9Used to calculate course calibration angle if "or" is selected in CRS CAL MODE adove.
(Press EVENT key to start.)
!0 S election of data output interval (15sec, 30sec,1min, 2min, 5min or 10min)
4-8
KNOB ITEM
: MENU1
: INT
: T/D
: CIF
: GPS
: LORAN-A
: L/L
: 1min
: GT
: START
: 15sec
Knob
KNOB SETUP
END : MENU KEY
MENU3
MENU2
EXT
NAV-TIDE
NMEA
LORAN-C
DECCA
ALL
SPD
NAV
MAN
Knob
1
MENU4
2
3
4
5
DR
6
7
8
9
!0
Advertisement
Table of Contents
