4. ACCURACY
1) SHIP SPEED
2) TIDE SPEED
3) DIRECTION
5. TRACKING SPEED
1) SHIP SPEED
2) TIDE SPEED
6. SOUNDING FREQUENCY
7. DATA INPUT
1) HEADING DATA
2) KEYING PULSE (for interference rejection) Current loop signal ...............................2ch
3) MISCELLANEOUSSerial (IEC1162, equivallent to NMEA0183) ..............................1ch
8. DATA OUTPUT
1) LOG SIGNAL
200 pulses/nm
400 pulses/nm
2) EXTERNAL ALARM
3) MISCELLANEOUS
1 % or 0.1 kt
2 % or 0.2 kt
3.5 (depending on sea condition)
Less than 40 sec.
Less than 60 sec.
130kHz approx.
Clocked-serial (AD100) ..................................................1ch
Heading;
($--HDT/HDM/HCD/HCC)
Depth;
($--DBS/DBT/DBK)
W-temp;
($--MTW)
Date/time;
($--ZDA/ZLZ/ZZU) --:any talker
Contact signal, forward only ...........................................2ch
(contact rating 0.2A/30V max.)
TTL level, forward only ..................................................1ch
Contact rating 0.2A/30V)
Speaker output ................................................................1ch
(800mW into 4 to 8 ohms)
Serial (IEC1162, equivallent to NMEA0183).................1ch
Speed/course($VDVTG/VBW/VHW)
Set & drift ($VDVDR)
Tide spd/dir ($VDVCD)
Current ($VDCUR)
Serial (Furuno CI-7000 format) for data recording ........1ch
(Date/time,ship's speed/course, tide speeds/directions,water
AP-3