Table of Contents
Advertisement
4) ANALOG SHIP SPEED
5) TRUE BEARING DATA
9. MISCELLANEOUS FUNCTIONS
10. NAV-AIDED TIDE MEASUREMENT
Even where ground tracking is unattainable, absolute tide movements (tide on ground) can
be calculated by applying accurate position and heading data to CI-35/35H. This function
may be extremely useful for deep sea purse seining or oceanographic survey.
Note: 1. Depths are measured below transducer surface.
2. The CI-35/35H uses an acoustic wave for speed measurements. Aeration due
3. Tide speed measuremants are made by detecting echoes from underwater
11. ENVIRONMENTAL CONDITIONS
1) Temperature:
2) Humidity:
12. POWER SUPPLY
Main's input:
Power consumption:
13. COATING COLOR
Display unit:
Transceiver Unit:
Junction Box:
AP-4
Current signal for Analog Display.
-3.33mA to 10.0mA/-10kt to 30kt
(Maximum load 400 ohms)
Clocked-serial (Furuno AD-100 format) ........................1ch
Self-check function,
Simple demonstration function
to rapid accelera tion/deceleration, heavy engine/propeller vibration or
interference from other sounding equipments can degrade performance of
this equipment.
microscopic objects like plankton. If density of microscopic objects
is too high or too low, depending on season or operating areas,
CI-35/35H may not provide normal measuring performance.
0 to 45 C
80%RH (without condensation)
100/110/115/220/230VAC,50/60Hz,1ø
100 - 240 VDC : 3.0 - 1.25 A
Front panel;
Cover plate;
Munsell 2.5GY5/1.5(standard)or 2.5G7/2
Munsell 2.5G7/2 (not changed)
Munsell N1.5 Newtone NO.5 (not changed)
Munsell 2.5GY5/1.5(standard) or 2.5G7/2
Advertisement
Table of Contents
