Table of Contents
Advertisement
3) When the horizontal cursor is on an item which has the filled star mark "
following sub-menu appears.
To make alarm setting valid;
1 Place the horizontal cursor on "SET ZONE" by
alarm zone setting display appears.
EX. Selected "1ST LAYER" - "DIR
SET
1. 2kt
280
LYR1 SPD
MIN 0.5kt
MAX 1.0kt
LYR1 DIR
MIN 45
MAX 90
2 As necessary, change alarm zone by
key.
To make alarm setting invalid;
1 In the alert message window, select "STOP ALM" by
key. The filled star "
alarm setting is now invalid. (Alarm zone settings are preserved, but they do not trip the
alarm.)
4. After entering the alarm/alarm zone, press the
alarm menu window.
5. When the conditions of an alarm are breached, with ship's movement or tide movement, the
alarm message starts blinking at the bottom part of the display. If the audible alarm is enabled
for that item, the alarm sounds.
¡ To cease the audible alarm, call the alarm menu and disable (OFF) the audible alarm
(
), or make the alarm setting invalid ("
¡ To mute the audible alarm temporarily, turn the VOLUME control counter-clockwise.
ALARM/ALARM ZONE SETTING
SELECT
: SET ZONE
PRESS EVENT KEY TO ENTER
MAX
MIN
" aside the option item changes to the hollow star "
KNOB SETUP
STOP ALM
knob, and press the
"
(MAX) and
(MIN), and then press the
key to store the settings and to close the
ALARM
"
"
".)
", beside it, the
key. The
EVENT
MIN
MAX
knob, and press the
" to show the
ENTER
EVENT
4-13
Advertisement
Table of Contents
