Kenmore 911.36665 Use & Care Manual page 20

OPERATION
Self-CleaningCycle
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled up to 5 hours if
oven is heavily soiled,
1. Latch the door handle,
Press the CLEAN pad,
4 hours will show in the
display,
If you want to change
the length of clean time
press the UP and/or
DOWN arrow pad
4. Press the START pad
Simply press the CLEAR/OFF pad
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. I hour) before
attempting to open the door
After the cycle, you may notice some
white ash in the oven, Just wipe it up
with a damp cloth or sponge
If white spots remain, scrub them
with a soap-filled pad Be sure to
rinse thoroughly, These are usually
deposits of salt that cannot be
removed during the cycle,
If for any reason you are net
satisfied with the cleaning results,
just repeat the cycle.
1. Latch the door handle
2. Press the CLEAN pad
3_
4.
If you want to change
the length of clean time
press the UP and/or
DOWN arrow pads
Press the DELAY
START TIME pad
Press the UP or DOWN
arrow pads to set the
time you prefer the
clean cycle to start
6. Press the START pad
20