Kenmore 911.36665 Use & Care Manual page 27

CARE ANDCLEANING
RemovableParts
TO REMOVE
Be sure that all controls are turned off
and that the unit is cool Lift off burner
grate, burner cap and burner head
Do not remove burner bowl
.<- Burner Grate
Mixer Tube
Burner _ _ Sparklgniter
Bow,--H (J
"_ Mixer Tube
(Chimney)
iiiii i, i,iii _ _-- i i1,11,1
r_The electrode ot the
spark igniter is exposed
beyond the top of the
burner. When cleaning
the burner bowl, be careful not to
snag the electrode of the spark
igniter with your cleaning cloth.
Damage to the igniter could
occur. Be careful not to turn
on any cooktop controls while
cleaning burner bowls. A slight
electrical shock might result,
which could cause you to knock
over hot cookware.
I!Jl
TO REPLACE
1. Place the burner head onto the
burner bowl making sure the
location of the spark igniter
matches up with the opening
in the burner head
2. Place the burner cap on the burner
head.
3. Place the grate over the burner
assembly and onto the burner
bowl. The indentations of the bowl
should match the Location pins on
the bottom of the grates
27