4.1.3 Setting The Units Of Measurements - Furuno NAVpilot-500 Operator's Manual

4. MENU OPERATION

4.1.3 Setting the units of measurements

The DISPLAY SETUP menu allows you to choose units of measurement.
1. Press the [STBY] and [MENU] key in order to open the STBY mode menu.
2. Rotate the [ENTER] knob to select "DISPLAY SETUP".
3. Press the [ENTER] knob to show the display setup menu.
To change pages, select "▼NEXT PAGE" or "▲PREVIOUS PAGE" and press the [ENTER]
knob.
4. Rotate the [ENTER] knob to select the item desired.
5. Press the [ENTER] knob to show the speed unit options window. The example below
shows the speed unit options.
4-10
kt
SPEED UNIT:
RANGE UNIT: nm
WIND SPEED UNIT:
DEPTH UNIT: ft
WATER TEMP UNIT:
POSITION FORMAT
DD MM. MMM"
NEXT PAGE
Page 1
PREVIOUS PAGE
HEADING READOUT:
SPEED READOUT:
ANALOG INDICATOR BAR:
RUDDER
DATE FORMAT: MMM. DD. YYYY
TIME FORMAT: 24HOUR
Page 2
Display setup menu
kt
km/h
MPH
Speed unit options window, for example
kt
F
MAGNETIC
SOG