BMW R50 Installation Instructions page 4

4
14. Insert iPod cable (1) through hole in glovebox
Note: Split grommet as shown before placing
around iPod cable in order to prevent damage
to cable.
15. Split grommet (1) as indicated (2) and insert
16. The flat iPod connector (1) should be located
17. Re-connect glovebox vent tube.
18. Re-install glovebox.
Caution: Check for bent pins on adapter
cables before attaching to iPod adapter. If
pins are damaged carefully bend them back
into position with a small screwdriver.
19. Slide iPod adaptor fully into foam padding
20. Connect white "iPod" adapter cable (2) and
Installation Manual P/N 01 29 0 393 657
as indicated.
grommet through hole in glovebox wall.
in the glovebox and the 8-pin DIN connector
(2) for the adapter box should be routed
through the center console to a location
behind the radio.
tube (1).
black "Radio" adapter cable (3) to iPod
adapter, making sure to connect cables in
their proper location.