BMW R50 Installation Instructions page 3

3
8. Insert 4 rectangular pins from iPod harness
9. Remove white 12-pin connector (3) from
10. Insert white 12-pin connector (1) from iPod
11. The white 12-pin connector (4) removed from
12. Connect 4-pin connectors (1 & 2)
13. Locate and drill 5/8" (16mm) hole in glovebox.
Installation Manual P/N 01 29 0 393 657
(1) into radio harness (2) as follows:
Color Location
White/gray 9
Brown 12
Violet/white 16
Red/green 15
lower section of radio connector.
harness (2) into lower left section of radio
connector (3).
the factory radio connector in Step 9 will not
be re-used for this installation.
A = 1" (25mm)
B = 1" (25mm)
C = 5/8"(16mm) Ø
Description
I-Bus
Ground
KL-R
KL-30